Pianos consistently make movers annual list of products that are most regularly harmed. Grand pianos are specifically troublesome. Practicing the following procedures for dismantling, cushioning and packing grand pianos will prevent damage, lower claims expense, and enhance customer satisfaction.
1) At least 3 individuals are needed to manage a baby grand piano. If the infant grand piano requires to go up or down stairs or if a complete or concert grand piano requires to be carried, a minimum of four people are required.
2) Always finish a accurate and extensive inventory. It might be required or preferable to utilize a visual inventory to properly explain and show pre-existing damage.
3) As numerous parts are taken apart, please location all hardware in a correctly identified parts bag and then position the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.
5) Disconnect the cover by removing the hinge pins. Have someone wiggle the cover, holding it opposite the hinge, while a second individual works the pin loose. Please beware not to damage the wood with the pliers or with the pin itself. If required, cover the jaws of the pliers with a little fabric to assist avoid damage to the wood. Wrap the lid in a clean furniture pad.
6) Eliminate the prop that holds the cover open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Remove the pedal assembly and wrap it in a tidy furnishings pad. The braces at the back of the assembly rest in slots at each end. When removing the screws, please beware not to drop the braces. In addition, please be particularly cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the suitable number on each rod. Note: If masking tape is unavailable, please usage properly labeled parts bags for this purpose. When reassembling at location, please be sure to put the rods in the appropriate order so that the pedals will work correctly.
8) Pad the piano by positioning a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you deal with the piano. Note: Please ensure that the surface area of the piano is dust-free prior to padding it.
9) Position a piano board and attach the straps so that it is prepared to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Eliminate the left front leg by placing a single person beneath the piano at the left end of the keyboard. The other 2 individuals need to support the left front corner. The individual below the piano need to turn the retaining block so that the long end points away from the leg. The screws, if there are any, ought to then be eliminated. The "beneath" person ought to then extricate the piano prior to in fact getting rid of the leg. Make certain to have 2 people lifting the corner of the piano while the third person removes the leg. Note: Please be sure to keep in mind which legs were gotten rid of from which positions considering that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be page sure to lift the whole piano a little while completing this maneuver to prevent excessive pressure on the staying, attached legs as the piano ideas. Be sure that the piano is focused snugly against the brace at the end of the piano board.
12) Get rid of the 2 staying legs and wrap them in tidy furnishings pads. These legs are kept in place by a "key and slot" arrangement. To eliminate the leg, slide it inward toward the center of the piano up until it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and fastening them. Place folded burlap pads over the furniture pads however under the straps to supply extra defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for security against residence damage, put more info here the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the leading end of the piano board to prevent the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to pack the padded cover is in between the piano and the preceding tier or between the piano and the a fantastic read wall.
Grand pianos represent a significant obstacle, they can be moved without damage by using common sense and practicing the treatments listed above.